How to Connect and transfer data between Two Computers Via Lan Cable

In this tutorial we are going to show you how to transfer data from one computer to another. We need to PC/Laptop and a lan cable to transfer data.

PC 1

Step1: Go to “Open Networking and Sharing Center“.
Step2: Click on “Local Area Connection“.
Step3: Now click on “Properties“.
Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“.
Step5: Click on “Use the following IP address:” and enter the IP address: as 192.168.1.1 and just give a click on Subnet mask. Once done click “Ok” and close it.

PC 2

Step1: Go to “Open Networking and Sharing Center“.
Step2: Click on “Local Area Connection“.
Step3: Now click on “Properties“.
Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“.
Step5: Click on “Use the following IP address:” and enter the IP address: as 192.168.1.2 and just give a click on Subnet mask. Once done click “Ok” and close it.

Now  two computers are connected. To share files we need to give access to our drives, so follow the commands given below to give access to your drivers.

Step1: Click on “Computer“.
Step2: Right click on driver and then Properties.
Step3: Click on “Sharing” tab and then Advance Sharing and then check out Share the folder
Step4: Click on Permissions to give control on the other PC and once done click “Ok” and close it
Step5: Click Security and then go onto Advance Settings > Change Permissions > Add > Advance > Find Now at bottom click Everyone

If you have any problems then you can  comment below this post

Note: If you share your data via WiFi the data transfer will be 1-2MB and if you share the data via Lan cable the data transfer will be 10-12MB

Read More

How to Hide Hard Disk Drives

Need protection from Intruders?? Here’s a solution. Place your important files and folders in any drives and hide the entire drive!!!
Steps to be followed :

1) Right click on My Computer and click on Manage.

2) A computer management tab opens and the left side options , you’ll see an option named Disk management under Storage. Click on it.

3) There you’ll be able to see all your hard disk drives. Right click on the drive you wish to hide and click on the option Change drive Letter and Paths.

4)Click on Remove and press OK.

Your Drive is now safely HIDDEN !!

Now to retrieve it,

1) Go to the same Disk management option, right click on the drive you have hidden , goto the option  Change drive Letter and Paths , press add and click OK.

It has RETURNED !!! Cool ain’t it ?? !!!

Read More